Gussin TPMS Relearn Procedure A0121
Sensor Relearn Procedure without a scan tool
C”OBDIIP dongle is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Hold TPMS Tester on left front tire sidewall next to the valve stem
Repeat for LR/RR/RF tires
Apply OBD dongle to DLC
Turn ignition to ON
Press OK on TPMS Tester to transfer data to ECU
Disconnect OBD dongle from DLC
Turn ignition to OFF then start the engine
Drive for at least 5 minutes at 28 mph:
Sensor Relearn Procedure with a scan tool
With Keyless Entry
OBDII dongle is not required
Confirm. TPMS sensors are properly installed
Adjust tire pressures to placard value
Inflate all tires
Turn ignition ON
Push and hold unlock and lock button on key fob until horn sounds
Use tool to activate LF sensor
Single horn sounds
Repeat for RF/RR/LR
Turn ignition OFF
With DIC Button
Inflate all tires
Apply parking brake
Turn ignition ON
Push the DIC information button until press TIRE LEARN is displayed
Push J to confrm
Horn sounds 2x and TIRE LEARNING ACTIVE is displayed
Use tool to activate LF sensor
