Gussin TPMS Relearn Procedure A0123
Sensor Relearn Procedure without a scan tool
OBDII dongle is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Hold TPMS Tester on left front tire sidewall next to the valve stem
Repeat for LR/RR/RF tires
Apply 0BD dongle to DLC .
Turn ignition to ON
Press OK on TPMS Tester to transfer data to ECU
Disconnect OBD dongle from DLC
Turn ignition to OFF then start the engine
Drive for at least5 minutes at 28 mph
Sensor Relearn Procedure with a scan tool
Inflate all tires
Apply parking brake
Turn ignition ON
Push the MENU button to select Vehicle information in DIC
Use arrow keys to select Tire Pressure
Push SET/CLR button to start sensor matching
Push SET/SLR button toselect YES
Horn chips 2x DIC displays TIRE LEARNING ACTIVE
Use tool to activate LF sensor
Single horn sounds
Repeat for RF/RR/LR
Horn chirps 2x for releam complete
Tip:Lowering driver's side window may help to complete this process on larger vehicles
