Gussin TPMS Relearn Procedure A0126
Sensor Relearn Procedure without a scan tool
OBDII dongle is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Hold TPMS Tester on left front tire sidewall next to the valve stem
Repeat for LR/RR/RF tires
Apply 0BD dongle to DLC
Turn ignition to ON
Press OK on TPMS Tester to transfer data to ECU
Disconnect OBD dongle from DLC
Turn ignition to OFF then start the engine
Drive for at least5 minutes at 28 mph
Sensor Relearn Procedure with a scan tool
OBDII dongle is not required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Turn ignition to ON
Press and hold lock and unlock button on the keyfob until horn sounds
Hold TPMS Tester on left front tire sidewall next to the valve stem
Horn chirps once
Repeat for RF/RR/LR tires
Turn ignition OFF
Tip:Lowering driver's side window may help to complete this process on larger vehicles
