Gussin TPMS Relearn Procedure A0025
Sensor Relearn Procedure with a scan tool
OBDII dongle is not required
Confrm TPMS sensors are properly installed
Adjust tire pressures to placard value
Turn ignition to ON
Press INFO button on DIC until LEARN TIRE POSITIONS
Press SET/RESET
Horn sounds twice
Use tool to activate LF sensor
Single horn sounds
Repeat for RF/RR/LR
Turn ignition OFF.
Note: If vehicle has no DIC buttons then press and hold trip odometer reset stem until the horn
chirps twice and the TIRE LEARNING ACTIVE message is displayed
Tip:Lowering driver's side window may help to complete this process on larger vehicles
